Mightee Mounts Sign Holders

Cloud Zoom small image

More Views

$45.00 each
Display rigid signs and attactract customers with single or double sided graphics using these metal sign holders. The unique M shaped steel base assembly accommodates any self supporting substrate up to 1" thick and makes for a modern, frameless look.
  • Quantity-discounted prices will be shown in the shopping cart.
$45.00 each

* Required Fields

$45.00 each

Product Questions

Hi. I'm wondering if you could tell me the "height" of the front angle? For instance, if I was going to order a decal for the plate... how much room do I have to work with (height wise)? I know it gives total height, but not the measurement of the front panel.
6
Are you able to put a board in that is wider than the base itse'f and if so, do you have max widths for each of your bases?
4
How high can the rigid display sign be without failing? Is it possible to reliably use a 70" or 80" high display on a 24" wide base?
0

Details

Display rigid signs and attactract customers with single or double sided graphics using these metal sign holders. The unique M shaped steel base assembly accommodates any self supporting substrate up to 1" thick and makes for a modern, frameless look.

Unlike standard sign stands and floor standing sign holders, these metal sign bases are not limited to holding a particular size graphic. Typically, Mightee Mounts are used at the same width as the graphic, but the height can be virtually any dimension. Mightee Mounts are extremely sturdy because the weight is centered on the floor. If using foam boards or other light weight substrates, Mightee Mounts can support graphics up to 8' tall. If using heavier substrates, such as acrylic, it is recommended that graphics not exceed 6' in height, and the taller the graphic, the more rigid it will need to be. Foam boards and similar materials can flex over longer lengths, so 1/2" thick substrates are recommended. While it's most common to use Mightee Mounts as a double sided display by using a rigid graphic that is printed on both sides, they can also be used single sided, or double sided by putting 2 single sided graphics back to back in the base. This can be useful if one side of the graphic needs to be used for a longer period of time than the opposite side. Inexpensive clear Graphic Clips are available in the Related Products tab that can be used to keep the top edges of the graphics together when using two boards in this manner.

Available in 14", 24", 36", 48" and 60" widths in both satin silver and matte black finishes. The platen faces can have graphics applied for a more custom look.

Graphics can have holes that match the position of the holes in the bases, and this provides the greatest stability, but graphics can also be placed above the carriage bolts so no holes in the graphics are needed. This is recommended for lighter weight graphics that are not used at the maximum height as it's not as stable. See the Instructions tab for details.

Mightee Mounts have a height of 3.5" off the floor, and measure 9" from front to back.

Additional Information

Is a Featured Product Yes
Price $45.00
Free Ground Shipping No

Instructions

Instructions

pdf file

Write Your Own Review

Only registered users can write reviews. Please, log in or register

  Loading...