Expand LinkWall Base Unit
The Expand LinkWall Base Unit is the basic building block for all Expand LinkWall displays. It can be used on it's own as a high-end portable banner stand, but it's mostly used in combination with other base units and flexible connector panels to create a LinkWall display in one of a multitude of possible shapes and sizes. The simple design of this professional quality display consists of the aluminum base with pivoting support foot and a magnetic lock to connect to the bottom of the graphic. A 3 or 4 section support pole, depending on the height of the display, inserts into the base and has a hook at the top that connects to the top profile of the graphic. The floating nature of this graphic attachment method means the graphic can adjust up to 3/4" to allow for uneven floors.
The Expand LinkWall Base Unit can be combined with other base units into a straight wall configuration that can be used either single sided, or double sided by adding additional graphic panels to the back side either with or without end caps to fill in the space between the banners from the side. The units connect together magnetically, as each graphic panel has magnetic tape on the sides, and special magnetic bars join the adjacent panels together from the back side. The special top and bottom profiles also contain connectors that help to hold the adjacent panels together for a seamless looking connection. By adding flexible connector panels between base units, flexible shapes can be created such as serpentines, curves, towers and U-shaped displays. The possibilities are endless and the product photos show some of the shapes that can be created by combining 7 base units and flexible connector panels. In addition to the large displays created with these components, multiple smaller displays can also be created so it's possible to use just the pieces necessary to create whatever size display is called for at each event.
Like all Expand displays, the LinkWall is a high quality product with Swedish design and a lifetime warranty. It's lightweight and was designed so a single person can set up an entire display by themselves without tools in matter of minutes.
The Expand LinkWall Base Unit can be ordered at a height of 86.625" or 114.1875". Keep in mind that you cannot mix and match heights in the same LinkWall display, so be sure to order all base units, graphic panels, connector panels, and end caps at the same height if you intend to use them together.
LinkWall base units can connect directly to other base units or to flexible connector panels, but connector panels can only be joined on either side by base units, and multiple connector panels cannot be joined together. Individual base units and all straight wall configurations can be made double sided by adding additional graphic panels to the back side of the display. Generally, curved shapes can only be used single sided.
Accessory items like the LinkWall MonitorHolder, end caps for single and double sided configurations, lights, carry bags and shipping cases can all be found in the Related Products tab.
The Expand LinkWall Base Unit displays a graphic with a visual area of 35.4375" wide x 86.625" or 114.1875" high.
Comes in a silver finish and ships packed in a box with no travel bag. The LinkWall Inner Bag can be purchased to hold up to two base units, and the LinkWall Soft Bag can hold the LinkWall Inner Bag with the base units along with the graphic panels. The Expand LinkWall PodiumCase is a special version of the PodiumCase that contains custom foam inserts and bags to hold up to three base units and graphics in a hard shipping case that can also convert into a podium display. All of these options are available in the Reltated Products tab.
Looking for a higher-end model?
There is no higher end banner wall style display.
Looking for a less expensive model?
The Versaflex is a less expensive option, although it's a different style of display. It does allow for different shapes and sizes of banner walls, but it doesn't have flexible panels that allow for curved shapes and all sections are made of straight panels.
Spotlights are a great accessory for trade show displays because such venues tend to have poor lighting. Displays with lights really stand out, so it's a simple way to increase the impact of your displays. For the Expand LinkWall, the Expand Banner Stand Spotlight, Expand 200 Watt Floodlight, and Expand LED Floodlight are all compatible. The floodlights give off the most light, so they are the recommended models. These can be found in the Related Products tab or in the Display Lighting section of the main menu.
A hard shipping case can be an excellent investment, especially when traveling with multiple stands. The Expand LinkWall PodiumCase is the recommended product when a shipping case is needed, and it can be found in the Related Products tab.
|Is a Featured Product
|Free Ground Shipping
Specs & Templates
Expand LinkWall Base Unit Specifications
- Graphic Width: 35.4375"
- Graphic height: 86.625" or 114.1875"
- Overall display height: 89" or 116.5"
- Footprint 35.4375" x 15.75"
- Shipping size: 40" x 14" x 8"
- Shipping weight, stand only: 15 lbs
- Shipping weight, with graphic: 20 lbs
- Warranty: Lifetime
Graphic templates are available in pdf and eps formats. Click their icons to download them.
These templates provide a framework for designing your graphics and show the live area as well as any required bleed.
Graphic Templates for 86.625" Height
Graphic Templates for 114.1875" Height