ClearWalk

$10.00 each

This clear textured slip resistant floor decal is great for wet area advertising, since it's our least expensive product that maintains its slip resistance while wet.

  • Quantity-discounted prices will be shown in the shopping cart.
$10.00 each

* Required Fields

$10.00 each

Product Questions

No questions yet. Be the first to ask the question!

Details

This clear textured floor decal material can be printed normally, or with a white under print to help keep the floor color from showing through the image. It is ASTM D-2047 certified as slip resistant without lamination, and the special adhesive remains easily removable without residue. Applies to most indoor surfaces such as tile, marble, concrete, linoleum, porcelain, etc. Tolerates water in showers, bathtubs, supermarkets, saunas, even inside swimming pools. Available in widths up to 51".

Longevity of up to 3 months.

Favorite Features

It can be used in wet areas such as showers and around pools, and is our least expensive decal that is slip resistant when wet. Since it's clear, it helps minimize the appearance of any unprinted areas.

Drawbacks

While clear, the material is thick and textured, so it's still fairly visible on the floor in the unprinted areas. It's a vinyl material, so it's not eco-friendly.

Best Applications

It's great for decals in and around pools, saunas and showers.

Additional Information

Is a Featured Product N/A
Is Product Tiled? Yes
Price $10.00
Free Ground Shipping N/A

Installation Instructions

Indoor Installation

Surface Preparation

  • Tile, vinyl, linoleum, terrazzo and ceramic floor surfaces should be cleaned with a commerical cleaner, washed with isopropyl alcohol to remove any grease, wax or cleaning solution residue, and allowed to completely dry.
  • Hardwood floors should be lightly cleaned with a commercial cleaner designed not to harm hardwood finishes and allowed to completely dry.
  • Any paints or coatings on the floor must have good adhesion to the flooring substrate.
  • Testing for product suitability by user is recommended prior to all applications
  • If there are seams or grout lines in the surface, avoid them or bridge the decal over the seams. Do not position the graphic so that the edges fall within 3" of grout lines.

 

Applying the Decal

  • Peel back about 1” of release liner from top of the decal. Fold and crease liner back.
  • Position decal starting with the top. Apply firmly using a plastic squeegee.
  • Continue removing liner a small amount at a time and press down the decal with the squeegee with overlapping strokes working from the center out at a 45 degree angle.
  • After the entire decal is applied, squeegee the entire surface, working from the center out, to remove any air bubbles and to ensure good adhesion. Make sure the edges are applied well.
  • Do NOT apply with water.

 

Routine Maintenance

  • Wait 24 hours after application before cleaning or waxing floor.
  • To maintain condition of the decals, avoid exposing them to heavy equipment traffic.
  • CAUTION: If the edges of the decal begin lifting, replace immediately to avoid risk of injury due to tripping hazard.

 

Removal Instructions

  • Lift one edge of the decal and pull using short, quick strokes.

 

Outdoor Installation

Surface Preparation

  • The sidewalk surface must be clean and dry prior to applying decals
  • Sweep the concrete surface thoroughly to remove any loose dirt or debris
  • Wash the concrete with a hose or pressure washer for the greatest adhesion and longest life
  • Testing for product suitability by user is recommended prior to all applications

 

Applying the Decal

  • Peel back about 1” of release liner from top of the decal. Fold and crease liner back.
  • Position decal starting with the top. Apply firmly using a plastic squeegee.
  • Continue removing liner a small amount at a time and press down the decal with the squeegee with overlapping strokes working from the center out at a 45 degree angle.
  • After the entire decal is applied, squeegee the entire surface, working from the center out, to remove any air bubbles and to ensure good adhesion. Make sure the edges are applied well.
  • Do NOT apply with water.

 

Routine Maintenance

  • Wait 24 hours after application before cleaning or washing the decal surface.
  • It's important to keep moisture from getting between the decal and the concrete surface, especially in freezing weather.
  • To maintain condition of the decals, avoid exposing them to heavy equipment traffic.
  • CAUTION: If the edges of the decal begin lifting, replace immediately to avoid risk of injury due to tripping hazard.

 

Removal Instructions

  • Lift one edge of the decal and pull using short, quick strokes.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

  Loading...