This economical and attractive A-Frame sign holder is designed to be portable, yet stable. Made from durable plastic, the frame is hollow and allows you to fill it with sand or water as needed to keep your signs in place, even in windy weather. Graphics are printed on adhesive vinyl, mounted to .030 aluminum and securely attached to the display with velcro to allow you to change the sign faces quickly and easily. For more permanent installations, the graphics can also be bolted to the frame.

Curb-Side Snapframe Stand

Attract more customers - coming & going. This sign holder is able to withstand strong wind gusts with its dual spring leg action. This stand is weather resistant for outdoor use. Holds posters of 28x44 or 41x55.

Features

• Quick-Changing Front Loading
• Dual-Sided viewing
• Two popular finishes, Black and Silver
• Heavy Duty Aluminum Frame
• Dual Spring steel base powder coated for weather resistance
• No Tools! All four sides snap-open easily by hand
• Visible Area: Moulding overlaps poster 3/8" all around
• Accepts printed materials up to 1/32" thick
• Backing Board: Withstands all weather

Heavy Duty Curb-Side Snapframe Stand

This stand is built to last. Fill its dome base with water or sand, and this stand will survive any wind gust. Holds posters of 28x44.

Features

• Quick-Changing Front Loading
• Dual-Sided Viewing
• Heavy Duty Aluminum Frame
• Two popular finishes, black and silver
• Dual Steel Springs powder coated for weather resistance
• Built-in wheels will allow the unit to be tipped and rolled
• Gray ballasted base can be filled with water or sand to withstand wind gusts
• No Tools! All four sides snap-open easily by hand
• Visible Area: Moulding overlaps poster 3/8" all around
• Accepts printed materials up to 1/32" thick
• Backing Board: Withstands all weather

Expand MediaScreen 2 Outdoor Double Sided Retractable Banner Stand

This is the first fully portable double-sided retractable display that can be used outdoors. With a visible graphic size of 33 7/16" x 70 7/8", this stand is easy to carry and it takes only a minute to set up. The MediaScreen 2 Outdoor endures wind, rain, and snow, and is of very high quality to resist corrosion, UV-radiation and wear and tear by wind and weather.

The Expand MediaScreen 2 Outdoor can be used on most surfaces such as snow, sand, grass, concrete and asphalt, and is an effective means to get close to your target audience, in all environments. Thanks to the extended stabilization feet and the spring-loaded pole, the graphics are allowed to flex while the base remains stable. With a 22 MPH wind, the graphic will flex to approximately a 60 degree angle. At higher wind speeds, the display will flex more and spring back once the wind subsides.

Optional stakes are available for additional stabilization on soft surfaces such as snow and grass.

Price with graphics include our 13oz Blockout Vinyl. Other material options are available.

Y Band

This high-tech display comes in two sizes. Y Band holds a banner up to 28x82 and Y Band Wide can hold up to a 41x82 banner. Both feature a base that can be filled with sand or water as needed to provide stability in up to 30 mph winds. Plus, it's mobile to give you the ability to move the banner wherever you need it. Great for attracting customers into your store.

Price with graphics include our 13oz Gloss Scrim Banner vinyl. Other material options are available.

Y Band 4

This high-tech double sided stand holds banners up to 28x82. The base can be filled with sand or water as needed to provide stability in up to 30 mph winds. Plus, it's mobile to give you the ability to move the banner wherever you need it. Great for attracting customers into your store.

Price with graphics include two of our 13oz Gloss Scrim Banner vinyl. Other material options are available.

Storm Outdoor Banner Stand

This outdoor stand holds a banner up to 24.5x71 and comes in a single and double sided version. The base can be filled with sand or water as needed to provide stability in up to 35 mph winds. Plus, it's mobile to give you the ability to move the banner wherever you need it. Both models come with a carrying bag, which is visible on the center base in the photo of the double sided unit at right.

Price with graphics include our 13oz Gloss Scrim Vinyl. Other material options are available.

Monsoon

This semi-portable double sided A-frame billboard banner holder features a strong frame that is quick and easy to assemble. The graphic size is 92.125" wide x 32" high. Typically, a vinyl banner is used that can be secured into place by bungee cords (bungee cords not included).

Price with graphics includes two of our 13oz Gloss Scrim Banner vinyl. Other material options are available.

Spinnaker

This versatile indoor/outdoor billboard can be used for single or double sided presentations. With a maximum graphic area of 8 foot wide x 8 foot high (weather and wind conditions permitting), it's an ideal promotional solution for outdoor events, advertisements, exhibitions and public areas such as airports and shopping centers. Units can be linked together for added impact.

Price with graphics includes two of our 13oz Gloss Scrim Vinyl. Other material options are available.

Tripole and Giantpole

These portable banner poles feature superior design and engineering and allow you display a vertical banner, either indoors or out. The Tripole can extend up to 12 feet high and display a banner up to 31.5x94.5. The base holds approximately 11.75 gallons of water or sand to keep the display stable in up to 30 mph winds. The Giantpole extends up to 20 feet high and displays a banner up to 43x130, and its base holds approximately 18.5 gallons of water or sand. Both are excellent when you need to get noticed either outdoors for events and anywhere there isn't a convenient method for displaying your banner, or indoors at tradeshows or exhibits.

Wind Dancer

Wind Dancer is a great option for outdoor and indoor banner display. It offers an adjustable display height of up to 16 feet and comes with a hollow base allowing the option of adding either water or sand as a weighting agent. The constructed unit is easy to position, erect and remove. Complete user instructions included.

Graphic size 43"W x 144"H Allow 1.5" for grommets along the top and inside edges.

BannerFlex D3 Bracket

The original BannerFlex design has endured the seasons to become the industry standard in banner mounting hardware for utility poles and light poles. After years of refinement, BannerFlex now offers its highest level of durability and performance with the following features.

356T6 Heat-Treated Cast Aluminum for superior strength and durability, and corrosion resistance

Bolt Holes so casting may be easily bolted to poles in lieu of banding

Banding Channels easily allow positioning of up to 3/4" wide banding to fasten casting to pole

Arm Slide Flanges so banners can be installed or removed without moving or removing the Main Casting. Allows banner-length adjustment of 1” at both top and bottom of banner. Arms may be removed when no banners are installed

Dacromet-Coated Set Screws and Zinc-Plated Hitch Pins are corrosion resistant and allows for easy installation and adjustment. The Hitch Pin provides added security.

Warranty: 10 Years when properly installed and maintained

4-Degree Cantilevered Casting (Top arm is canted up, bottom arm is canted down) so wind energy is transferred from banner to the fiberglass arm. Keeps banner trim and in tension and promotes banner longevity.

Eyelet Included in Casting allows for cable ties to be utilized through both the banner grommet and casting to secure banner providing added security from loss or theft.

Available with standard round fiberglass arms or tapered Airow arms. Both arm styles provide flexibility while maintaining strength, and absorb wind energy to reduce stress on the banner and the light pole. The inherent flexibility of both arms allow the banner to return to its original taut position once wind subsides. The Airow arms increase the flexibility of the arm by up to 50% to dissipate even more wind energy, making them perfect for high wind areas or when extra wind load reduction is required.

BannerFlex Metro Bracket

The Metro Bracket was specifically designed with Metropolitan areas in mind. In response to requests for a smaller, but adjustable bracket for fluted and ornamental light poles, Consort is pleased to introduce the attractive, streamlined Metro bracket. This sleek hardware is perfect for historical, informational or decorative images in all downtown settings.

Has the same features and warranty as the D3 bracket, but the Metro bracket has a 2-degree cantilevered casting.

BannerFlex JR Banner Bracket

The use of decorative light poles has created a need for banner brackets specific to these poles has resulted in the creation of BannerFlex JR banner brackets. Using the weather-tested BannerFlex fiberglass arm to deflect wind-load, BannerFlex JR protects the structural integrity of these valuable poles and prolongs fabric and vinyl banner life.

BannerFlex JR also uses a durable, one piece, low profile casting well proportioned for decorative light poles in pedestrian areas, and offers the following features.

356T6 Heat-Treated Cast Aluminum for superior strength and durability, and corrosion resistance

Banding Channels easily allow positioning of up to 3/4" wide screw gear banding to fasten casting to pole

Eyelet Included in Casting allows for cable ties to be utilized through both the banner grommet and casting to secure banner providing added security from loss or theft.

Our wall mount frame tensions your banners into perfect signs. No strings attached!

• No more rips, ropes or sags. Guarantees 100% performance the entire promotion.
• One time affordable purchase for years of use.
• Simple installation and banner changes.
• Hardware is 95% concealed for a crisp, professional display.
• Stands up to all but the most severe winds.
• Models for banners from 3x6 up to 4x24

These black powder coated frames will hold your sign without the need for screws, bolts, or clips and allow it to be viewed from both front and back. Made from angle iron, they feature a unique upper channel and lower cross bar design that allows the sign to simply slide in from the top. Available in 18x24 and 24x36 sizes. Prices with graphics are for our Promotional Adhesive Vinyl mounted on both sides of an Alumalite blank.

Realicade is made from engineering grade polymer with UV additives to create a durable and non-fading Real Estate Sign. Key Features and Benefits:

• Overall Height 45.5"
  
• Overall Width 26.5"
  
• Sign Area Height 18"
  
• Sign Area Width 24"
  
• Light Weight (3.5 lbs)
  
• Foot Steps for easy installation
  
• Never Rusts
  
• No Splinters
  
• Will not fade
  
• No Painting
  
• Wash with soap and water
  
• No Metal spurs

Realicade is made from engineering grade polymer with UV additives to create a durable and non-fading Real Estate Sign. Key Features and Benefits:

• Overall Height 45.5"
  
• Overall Width 26.5"
  
• Sign Area Height 18"
  
• Sign Area Width 24"
  
• Light Weight (3.5 lbs)
  
• Foot Steps for easy installation
  
• Never Rusts
  
• No Splinters
  
• Will not fade
  
• No Painting
  
• Wash with soap and water
  
• No Metal spurs

These galvanized steel wire stakes for displaying signs on CorX corrugated plastic make the most economical combination for the posting of political, real estate, garage sale, and other types of outdoor signage. Strong, 9 gauge galvanized wire is weather resistant and rust proof.