EasyGraphics Gripper - Plastic Poster and Banner Hangers

With EasyGraphics, hanging graphics couldn't be easier. Simply push any rigid or semi-rigid graphic up to 3/32" thick into the opening and the flexible teeth grab the graphic for a secure fit. For soft, flexible materials such as fabrics and banner vinyls, use the SnapGraphics Gripper instead.

• Available in 9 different widths from 18" to 96" wide.
• Sold as a kit with top and bottom crossbar and 2 universal hanging clips
• Change graphics in seconds an reuse as often as desired
• No scoring, pockets, or other graphic treatment required
• Available in clear, white, black, or silver
• Hanging accessories such as hooks, grid clips, and angled connectors are available below
• Also available in adhesive back models at the same price but without hanging clips

9.00

9.00

EasyGraphics Aluminum Poster and Banner Hangers

The EasyGraphics aluminum clad graphic gripper hanging system features phenomenal performance with the convenience of instant graphic insertion. Simply push any rigid or semi-rigid graphic up to 3/32" thick into the opening and the flexible teeth grab the graphic for a secure fit. Thick graphics up to 3/8" can also be used with options screw posts. For soft, flexible materials such as fabrics and banner vinyls, use SnapGraphics instead.

• Available in 9 different widths from 18" to 96" wide.
• Sold as a kit with top and bottom crossbar and 2 universal hanging clips
• Change graphics in seconds an reuse as often as desired
• No scoring, pockets, or other graphic treatment required
• Available in silver or black finish, in a rounded or square profile
• Aluminum casing is available in the standard 1" height or the taller 1.5" height that completely hides the plastic gripper bar
• Hanging accessories such as hooks, grid clips, wall mounts, and angled connectors are available below
• Also available in adhesive back models at the same price but without hanging clips

SnapGraphics Aluminum Poster and Banner Hangers

SnapGraphics, the finest aluminum clad graphic gripper. Simply open, insert any graphic up to 3/32" thick and snap closed and the SnapGraphic will hold your graphic with incredible strength, torque and care. The patented design closes easily with the graphic inserted, and the gripper lobe engages and compresses the graphic against a soft cam surface creating incredible retaining power. Thick graphics up to 3/8" can also be used with options screw posts.

• Available in 9 different widths from 18" to 96" wide.
• Sold as a kit with top and bottom crossbar and 2 universal hanging clips
• Change graphics in seconds an reuse as often as desired
• No scoring, pockets, or other graphic treatment required
• Available in silver or black finish, in a rounded or square profile
• Aluminum casing is available in the standard 1" height or the taller 1.5" height that completely hides the plastic gripper bar
• Hanging accessories such as hooks, grid clips, wall mounts, and angled connectors are available below
• Also available in adhesive back models at the same price but without hanging clips

For open hooks, closed loops, barbs and more. Black or silver finish. Sold in bags of 12.

Aluminum screw posts can be used with aluminum SnapGraphics or EasyGraphics in place of the plastic gripper inserts to hold thick graphics up to 3/8". Set of 2.

Standard 1/16" x 1" or Large 1/8" x 1 5/8". Sold in bags of 100.

Economical plated steel hangwires. Holds up to 10 lbs. Lengths from 4" to 36". Sold in bags of 50.

Polycarbonate clear locking hooks. Holds up to 5 lbs. Lengths of 6", 12", and 18". Sold in bags of 50.

1/4" hook slot rotates 360°. Press sides to snap on ceiling grid. White. Sold in bags of 10.

Clear one piece hook hinges open and closes around ceiling grid. Sold in bags of 10.

3/8" diameter eye. Great looking piece, snaps on and is very strong. Sold in bags of 10.

White finish. 1/2" x 1" diameter. Holds 15 lbs under perfect conditions when fresh.

Clear 1 3/4" diameter suction cup with hanging hook. Great for window mounting. Sold in bags of 100.

Includes 2 top and 2 bottom hangers for attaching aluminum SnapGraphics and EasyGraphics bars to walls.

Includes 2 steel braces for attaching aluminum SnapGraphics and EasyGraphics bars to slatwalls.

Use the 90° Wall Mount Bracket with aluminum SnapGraphics and EasyGraphics bars. By removing one end cap, bars up to 36" long can be mounted at a 90° angle to the wall. Set of 2.

Specially designed for hanging multiple graphics in a series. Set of 2.

Can be used to connect multiple graphics together into a longer display, or use to connect multiple bars together to support a larger graphic.

Triangular Connector

Use this 60° angled connector to create a sharp corner, or use three to create a hanging triangular skybox display.

Square Connector

Use this 90° angled connector to create a square corner, or use four to create a hanging square skybox display.

X Spoke Connector

Use this X shaped connector to create a hanging cross skybox display.

$0.95 each

BannerFlex D3 Bracket

The original BannerFlex design has endured the seasons to become the industry standard in banner mounting hardware for utility poles and light poles. After years of refinement, BannerFlex now offers its highest level of durability and performance with the following features.

356T6 Heat-Treated Cast Aluminum for superior strength and durability, and corrosion resistance

Bolt Holes so casting may be easily bolted to poles in lieu of banding

Banding Channels easily allow positioning of up to 3/4" wide banding to fasten casting to pole

Arm Slide Flanges so banners can be installed or removed without moving or removing the Main Casting. Allows banner-length adjustment of 1” at both top and bottom of banner. Arms may be removed when no banners are installed

Dacromet-Coated Set Screws and Zinc-Plated Hitch Pins are corrosion resistant and allows for easy installation and adjustment. The Hitch Pin provides added security.

Warranty: 10 Years when properly installed and maintained

4-Degree Cantilevered Casting (Top arm is canted up, bottom arm is canted down) so wind energy is transferred from banner to the fiberglass arm. Keeps banner trim and in tension and promotes banner longevity.

Eyelet Included in Casting allows for cable ties to be utilized through both the banner grommet and casting to secure banner providing added security from loss or theft.

Available with standard round fiberglass arms or tapered Airow arms. Both arm styles provide flexibility while maintaining strength, and absorb wind energy to reduce stress on the banner and the light pole. The inherent flexibility of both arms allow the banner to return to its original taut position once wind subsides. The Airow arms increase the flexibility of the arm by up to 50% to dissipate even more wind energy, making them perfect for high wind areas or when extra wind load reduction is required.

BannerFlex Metro Bracket

The Metro Bracket was specifically designed with Metropolitan areas in mind. In response to requests for a smaller, but adjustable bracket for fluted and ornamental light poles, Consort is pleased to introduce the attractive, streamlined Metro bracket. This sleek hardware is perfect for historical, informational or decorative images in all downtown settings.

Has the same features and warranty as the D3 bracket, but the Metro bracket has a 2-degree cantilevered casting.

BannerFlex JR Banner Bracket

The use of decorative light poles has created a need for banner brackets specific to these poles has resulted in the creation of BannerFlex JR banner brackets. Using the weather-tested BannerFlex fiberglass arm to deflect wind-load, BannerFlex JR protects the structural integrity of these valuable poles and prolongs fabric and vinyl banner life.

BannerFlex JR also uses a durable, one piece, low profile casting well proportioned for decorative light poles in pedestrian areas, and offers the following features.

356T6 Heat-Treated Cast Aluminum for superior strength and durability, and corrosion resistance

Banding Channels easily allow positioning of up to 3/4" wide screw gear banding to fasten casting to pole

Eyelet Included in Casting allows for cable ties to be utilized through both the banner grommet and casting to secure banner providing added security from loss or theft.

HangTight Wall Mount Banner Frame

Our wall mount frame tensions your banners into perfect signs. No strings attached!

• No more rips, ropes or sags. Guarantees 100% performance the entire promotion.
• One time affordable purchase for years of use.
• Simple installation and banner changes.
• Hardware is 95% concealed for a crisp, professional display.
• Stands up to all but the most severe winds.
• Models for banners from 3x6 up to 4x24